Tall Skinny Mini #3

Here we are, back with another tutorial.  We are doing pages 3, 4, and 5.   I also have the video for these pages up on YouTube .

I had a question about the assembly of this book.  I made the base pages (that we are doing here) first.  Then I will show you how to bind them.  Then we will decorate.  I find it easier whenever I construct my pages to do it in this way.  When I decorate, having them bound in the book first helps me to see the colors and plan my use of embellishments, etc.  I hope that you like this way too.  So, make the pages, but don't bind them yet.  You don't have to place them in the order that we are making them.  Do what is visually pleasing to you.  After all the pages are bound, then we'll decorate!  :)

This is going to be very picture heavy.  Sorry.

First, score your 12x12" card stock at 2", 6" and 10"

 Cut 6 1/4" up on the left side, and down on the right side, as shown on the red lines.

 Score the 2" sides as shown.   They are reverse of each other, so that one mini pocket is on the top, and one is on the bottom.  You could, however, reverse them, or make them both top or bottom pockets.  The choice is yours.

 For each side, fold the 2" side in...

 Fold the flap down, and the 1/2" tab under, this creates your pocket.  You just have to glue the outer edge and the tab.

 This shows the page folded and glued.

 First side of the page...the mini pocket and the first 4" page...

 ..turned over here is the second 4" page and the other mini pocket.

 Another view.

 Using card stock here...cover the card stock with papers to make it pretty.  This shows the left mini pocket not glued down, and the right pocket glued together.

 It is important to remember to fold the pocket piece flap to the back of the project when using card stock, so that your pocket doesn't compete with the score lines on the page it attaches to.

 If you are using straight patterned paper without card stock, you have to fold the pocket flaps OPPOSITE so that you can utilize the reverse pattern on the paper.  To make it fit nicely, and not compete with the score, cut out a SLIVER of paper on the side of the pocket.  Then the pocket will fold nicely into the score line.

 There it is...page 3 done.  Now lets look at page 4.

 This is a simple trifold.  Score at 4" and 8".  Fold as shown.

The space between the first 4" section and the second section will create the binding edge and the tall skinny pocket.  The third section is a separate page in this assembly.

 Here it is using card stock covered with patterned paper.

 Top view...

 What it will look like inside the book, this with be the 2nd and 3rd sections of this page assembly.

And the 4th section.

Just using patterned paper.  The first three sections will be the same paper, but the 4th will be the contrasting side.

Now page 5.

 Score as shown.  Can you see where this one is going?  This is going to create a pocket page, but one bigger pocket on one side.

 Cut on the red line as shown.

 Fold and glue, and there it is.  Simple.

 Here it is, made with the card stock and patterned paper.

 My hand is in the binding side.

 If you are using patterned paper only, remember to cut a sliver off of the paper on the pocket flap side so that when you fold it in it fits nicely into the score.

 Here it is, finished.

 I am loving how this is turning out.

 That's that for now.  Stay tuned.  More pages to come.

Stay crafty, my friends!!!

Tall Skinny Mini #2

Hi all!  Here is the next installment of the Tall Skinny Mini tutorial series.  The original book is here.  The first tutorial on the cover and binding is here.  I hope you all like it.  Today I am going to focus on the first two page assemblies for the book.  I have also done a video tutorial on YouTube that you can check out!  It might make it easier to understand.

Here is how I want to do this...I am showing you how to create the pages on white paper (for demo purposes), then using the card stock that will have to be covered with patterned paper, then how to do it with patterned paper only.  I am trying to make this super easy to follow, but if you have questions, please don't hesitate to let me know!

We are going to make the pages first, then, when all of the pages are made, we will bind them into the book.  The last step is to decorate!

For page #1:  Take the 12x12" card stock, and score it at 2", 6" and 10".  Fold the 2" as a valley fold, the 6" as a mountain fold, and the 10" as a valley fold.

 The red lines indicate where to put WET glue.
Please don't do it yet, read the whole post first!!!

 When you get it all folded and glued, there will be a pocket on each side of the page.  The open end of the page is where the binding edge will be.  This is how we will adhere it to the book.

 Now that you saw the "tutorial" piece, this is how a card stock piece will look.  After scoring and folding, but BEFORE GLUING, adhere patterned paper as desired.

 I cut mine at 11 7/8" x 3 7/8".  I also distressed edges with distress inks.

 After adding the papers, I folded the 2" sides over and glued in place with wet glue.  Pockets created.

 The open edge will stay open at the top for a pocket, the side is how the page binds to the book, and the bottom will be glued AT THE BINDING TIME to close the "inner tall pocket".

You can do the same thing with patterned paper. 

 You can skip the card stock and just make the pages out of double sided patterned paper.  It will save some time.  The pages will be "thinner" but will be just as pretty.  This shows the folding of the pages, and how the side pockets will look.

 And now for page #2.

 Take the card stock (or patterned paper) and score at 4" and 8".  Then, on the 8" score, cut down to the 4" mark, then cut across...

 Remove this piece and save it for tags or embellishing later.  The bottom 4x4" piece creates a pocket. The red lines indicate where to put the wet glue on the lower 4x4" pocket piece.

 It folds over and, Taa Daa...you can, if you want, reverse the cutting to the other side and have the pocket on the other side if you want.

Here it is, with card stock.  

 Add the patterned paper BEFORE YOU GLUE THE 4x4" POCKET DOWN, if desired.

Fold the 4x4" piece over, and your page is done.

 Here it is, using patterned paper.

 When all finished, this is the "front" of the page.  The top will stay open for tags, the side is the binding edge, and the bottom will be wet glued to close the "inner tall pocket".

Once all adhered inside the book, when you turn the page, this is the pocket you will get.

Two pages down, 8 more to go, plus a few more goodies too!  Thanks for looking, and I hope you have fun with this.  I will be back soon to do a couple more pages!

Stay crafty, my friends!!

Tall Skinny Mini Album Tutorial #1

Hey everybody!!  I am finally getting this tutorial series underway!!  WOO HOO!!!  Thank you for being patient with me, I really appreciate it!

My plan is this:  I am going to do the cover and binding today, and then start with the pages, a couple at a time.  I am planning on trying to do the page tutorials on YouTube, as it will be a little bit easier to explain, but if it doesn't work out, I will do the tutorials all here on the blog.  Either way, you will get all of the information you need to make your own "Tall Skinny Mini"!

Let's get busy!!!  First, a few notes. The inspiration for this mini came from the "Witches Journal" I saw on YouTube.  The use of the Tyvek for reinforcing the spine came from Kathy at Paper Phenomenon.  It really does work and is a great way to recycle those Tyvek envelopes you get in mailings.  The "Stack the Deck" binding is by Laura at Following the Paper Trail.  The pages of this book are my creations.  I sure hope you like them!

 For this tutorial, I am going to use the papers from Basic Grey, Fact or Fiction, and Hello.  I have three paper stacks and a bunch of accessories to embellish it with!

 I also am going to use Bazzill card stock.  You will also need some chipboard for the covers and some strong adhesive.  I am using Score Tape...I love this stuff!

First, cut three pieces of chipboard for the covers, two at 12" x 6" and one at 12" x 2 1/2".

 I cut a strip of Tyvek, 12" x 5", and centered the spine piece on it.  I put a piece of 1/4" score tape along each side of the chipboard.  You use this as a space measurement between the cover pieces and the spine pieces.  Put more score tape on the rest of the Tyvek.

 Adhere the cover pieces.  This is what it should look like, this will be the inside of the cover.

 This is the outside of the cover.

 I inked up the corners of the book because they will not be totally covered with the card stock.  This is important, because if the chipboard isn't inked you will be able to see it once the card stock is on the piece if it is not super precise.

I cut strips of card stock as follows:  two at 12"x 1 1/2", and four at 9 1/4" by 1 1/2".  These pieces will edge your chipboard piece.  I like wrapped edges on my chipboard covers, so this is how I figured out how to cover the piece, since it is 12" tall.  You don't have to do this, you can simply just cover the chipboard and trim the edges if you desire.  If you decide to do that, ink the entire edge of your chipboard piece.

 The pieces layered onto the card stock.  The 12" pieces go on the sides, the others go on the top and the bottom.

 Use lots of score tape to adhere everything.  And, DON'T FORGET TO PICK UP THE STRIPS OFF OF THE GUSSETS BY THE SPINE BEFORE YOU ADHERE THE CARDSTOCK COMPLETELY DOWN.  See below.

 Wrap your edges.  I then used two pieces of patterned paper, cut 11 3/4" by 5 3/4", and covered the front and back outside covers.  This leaves the spine exposed.  I cut a piece of card stock at 12" x 6" and punched it.  Before I did the punching I put score tape on the edge.

That way when you go to adhere the piece, all of the punched edges have adhesive on them!

 This is the outside cover all done.

For the inside cover, I used the leftover 6" of card stock and covered the spine, then I covered the inside covers with more paper.  

 Here is my cover, all done.  Now to the binding mechanism.

I am making 10 pages for this book.  This means you need five papers.  They all, when stacked create a 1/4" gusset to allow for some room to embellish and add "stuff" to your pages.

 Cut the card stock into 5 strips, 12" by 1 1/4", 1 3/4", 2 1/4", 2 3/4" and 3 1/4".  Score each piece on each side at 1/2".  This is what your page pieces will adhere to.

 Side view of the binding.

If you desire, you can angle the edges of the binding pieces so that the pages adhere a little easier, but it's not necessary.

 Once your binding piece is done, adhere it to the inside spine of your cover.

That concludes the first part.  Next time, pages to put into your book.  This is going to be fun!

Stay Crafty, My friends!

February Blog Hop Time!

Welcome, Welcome, WELCOME!!!  It's time for the Just a Few Friends group to have our blog hop showcasing our awesome, wonderful, and PURRFECT Valentine's Day Gift Bags!!!

You should have pounced on over to me from RJ's blog.  If you found me while prowling around the internet, please start with Elsa's blog and follow the links to jump from den to den to see what we have created for your viewing pleasure.   I have a full list of my "den siblings" at the end of the post as well.  

Please say "Hello" to our newest Cub, Carrie!!!  She is joining us for the first time this month!  

Our challenge:  Create a gift bag, and decorate it for use with a Valentine gift.  We could use the colors pink, red, brown and/or black.   The rest, well that was up to us!  I came up with a little project to contain a present for my awesome and wonderful husband, DJ, the King of my Jungle!  I know he is going to see this post, so I am not showing the present on the inside, but he can get a sneak peek at the outside!

 I found this awesome paper line by Authentique and I knew it would be PURRFECT for my project.   It was a 6x6" paper pad kit, with all kinds of card making stuff that came with it.   I made the gift bag, and then made a card to go with it.

 I used a Martha Stewart edging punch on the black card stock, then layered the patterned paper over it.  I created a pocket with some more paper, and made the "tickets" to go in it.  There is a little paper key in the ribbon in the bottom.  Above, I put a large metal key with the sentiment, "You hold the key to my heart."

 These "tickets" came in the paper collection.  I matted them with red card stock.  I am going to wait to show the inside of the card...I don't want to spoil DJ's surprise!!!

Other supplies used:  Tim Holtz distressing ink, Prima Flowers, Recollections rhinestones, ribbon.  I also covered the back side of the gift bag with the same punched black card stock and key patterned paper.  I wanted the bag to be sort of symmetrical.

I hope you enjoyed your stay here!  Please let me know what you think of my offering for this month, and then go stalk Sherain and see what she came up with!!!

Have a wonderful Valentine's day, and remember...Show the ones you love how much you love them every day.  It doesn't have to involve gifts, just show them and tell them!  Valentine's Day can be everyday!

Elsa       http://justafewdesigns.blogspot.com

Suzie   http://scrappingsuzieqtt.blogspot.com

Margaret  http://auntmargaretdesigns.blogspot.com

Bon   http://tootiebeeblebugcreations.blogspot.com 

Rj       http://thriftycrafterdude.blogspot.com

Michelle http://www.creativeoperation.blogspot.com/

Sherain http://proudmommy702.blogspot.com/

Yvette http://daileyscrapper.blogspot.com

Jules http://thejulebox.com

Carrie        http://wwwcarrie-tumblingaround.blogspot.com